The Driver16 peripheral board converts the low-level TTL port outputs of any of our single board computers, including our Logicflex, Flashlite 386Ex, Flashlite 186 and picoflash single-board controllers into to high current outputs suitable for driving lamps, solenoids, relays, and small stepper and DC motors.

Each high-current driver can handle up to 500mA and can withstand up to 50 Volts in the off state. See the User Manual for limitations on total board current.

Driver16 Peripheral Kit (99-0066) includes the Driver16 board, a pins and shells connector kit, and a 1" cable to connect the board to a host processor.

$29.00 - Quantity 1