[ Homepage ]
[ What's new ] [ Contact ] [ Sitemap ] [ Forums ] [ Top Menu ]
[ Products ]
[ Documentation ]
[ Downloads ]
[ Sales ]
[ JK Alliance ]
[ FAQ ]
[ Proven Solutions ]
           

µFlashTCP-EP Technical Information

µFlashTCP-EP Mechanical Drawing Pricing and Orderng Documentation Programs and Utilities

Specifications

ProcessorIntel 386Ex, 25MHz
Operating System XDOS(MS/PC DOS 3.3 compatible)
Memory 512K SRAM, 512K Flash
Ethernet 10BASE-T, NE2000 compatible
Link status and Activity LEDs
Serial Port 1 RS-232 with 5 handshake lines
COM1, address 0x3F8, IRQ4
115200 baud maximum
Serial Port 2 RS-232 no handshaking or
RS-485 half duplex,
COM2, address 0x2F8, IRQ 3
115200 baud maximum
Watchdog Programmable Timeout,
Generates processor NMI
Sync. Serial Full duplex
Independent Rx and Tx clocks,
Master or Slave operating mode
Supply Voltage 7-34VDC
Supply Power 2 Watts typical
Humidity 5 - 90%, non-condensing
Temperature -20 to +85 °C
Weight 12oz (340 gm)
Dimensions no baseplate3.6" x 4.3" x 1.8"
(91.4mm x 109.2mm x 44.5mm)
Dimensions with baseplate4.6" x 4.3" x 1.8"
(116.8mm x 109.2mm x 44.5mm)
Digital I /O 10 Bits (P3.0-P3.5 & P1.4-P1.7)
Pin configurable as input or output
P3.3 and P3.4 configurable as interrupts
8mA source /sink

I/O Port Characteristics

Symbol Parameter MIN MAX Units Condition
VIL Input Low -0.3 0.8 V
VIH Input High 2.0 Vcc+0.3 V
VOL Output Low 0.45 V IOL=8mA
VOH Output High Vcc-0.5 V IOH=-8mA

µFlashPlus Mechanical Drawing

µFlashTCP-Plus Mechanical Drawing

Optional Features

  • Additional M-Systems DiskOnChip, 512K SRAM, 512K Flash or Battery backed clock calendar with 128K SRAM (20-0074).
  • Digital I/O interface option using I/O BreakOut Kit (99-0048) or purchasing preinstalled I/O BreakOut package (89-0047).
Home | Products | Company | Order
Copyright © 1998-2003 JKmicrosystems, Inc.