[ Homepage ]
[ What's new ] [ Contact ] [ Sitemap ] [ Forums ] [ Top Menu ]
[ Products ]
[ Documentation ]
[ Downloads ]
[ Sales ]
[ JK Alliance ]
[ FAQ ]
[ Proven Solutions ]
           

[ PowerNut Technical Info ]

[ PowerNut Mechanical Drawing ]

Jumpers and Connectors

JP1Enable/disable for reverse polarity protection
JP3Downstream Configuration Jumpers
J1Power Input Connector
J2Power Output Connector location
[ Pricing & Ordering ]
[ Documentation ]
[ Programs & Utilities ]

Specifications

ProcessorLow-power PIC, 32768 Hz
Supply Voltage 5-30 VDC if not using the on-board 5 volt switching regulator
7-30 otherwise
Current Consumption with no load attached Downstream shutoff: 180µA max (58 to 100µA typical)
Downstream active, on-board 5V disabled, Vin=5V, 3.3mA
Downstream active, on-board 5V disabled, Vin=30V, 7.5mA
Downstream active, on-board 5V active, Vin=7V, 11mA
Downstream active, on-board 5V active, Vin=30V, 15mA
Operating Temperatur -20 to +85 °C
Humidity 5 - 90% non-condensing
Physical dimensions 2" x 3" x 0.6"
(50.80mm x 76.20mm x 1.58mm)

Mating Connectors

Connector Mfg MFG P/N JK micro P/N
J3 (1x6) Molex 22-01-3067
Oupiin 4071-6H 28-0085
Pins (for 1x6) Molex 08-50-0114
Oupiin 4071-PIN-T 28-0013
Shell (2x5) Molex 22-55-2101
Oupiin 4072-2X05H 28-0030
Shell (2x13) Molex 22-55-2261
Oupiin 4072-2X013H 28-0031
Pins (for 2x5,2x13) Molex 16-02-0096
Oupiin 4072-PIN-T 28-0033

Home | Products | Company | Order
Copyright © 1998-2003 JKmicrosystems, Inc.