| |
![[ LogicFlex Technical Information ]](http://www.jkmicro.com/images/ti_logicflex_title.gif)
Connectors and Jumpers
| J1 | Processor Bus |
| J2 | Power |
| J3 | Multi-I/O Bus(General I/O) |
| J5 | IO Ports C and D |
| J6 | IO Ports A and B |
| J7 | IO Port E |
| J8 | Ethernet |
| J9 | COM1 |
| J10 | COM2(Console) |
| J11 | RS-485 |
| J12 | CPLD JTAG |
| JP1 | Socket Memory Type & Boot Memory Location |
|
|
Specifications
| Processor | Intel 386Ex, 25MHz |
| Operating System | XDOS(MS/PC DOS 3.3 compatible) |
| Memory | 512K SRAM, 512K Flash |
| Ethernet | 10BASE-T, NE2000 compatible
Link status and Activity LEDs
|
| Serial Port 1 | RS-232 with 5 handshake lines
COM1, address 0x3F8, IRQ 4
115200 baud maximum |
| Serial Port 2 | RS-232 no handshaking or
RS-485 half duplex,
COM2, address 0x2F8, IRQ 3
115200 baud maximum |
| Digital I/O | 46 Bits: P1.4-P1.7 & P3.3-P3.4,
Pin configurable as input or output
P3.3 & P3.4 configurable as interrupts
8mA source/sink. State change interrupt
configurable as input or output, 4mA
source/sink. State change interrupt
capability on Ports A & B. |
| Watchdog | Programmable Timeout,
Generates Hardware Reset
|
| Sync. Serial | Full duplex
Independent Rx and Tx clocks,
Master or Slave operating mode |
| Supply Power | 5V DC ±5%, 2 Watts(nominal) |
| Humidity | 5 - 90%, non-condensing |
| Temperature | -20 to +85 °C |
| Weight | 2.6oz (73.7 gm) |
| Dimensions | 4.20" x 3.60" x 0.65"
(106.7mm x 91.4mm x16.5mm) |
I/O Port DC Characteristics for Ports 1, 3
| Symbol | Parameter | MIN | MAX | Units | Condition |
| VIL | Input Low | -0.3 | 0.8 | V | |
| VIH | Input High | 2.0 | Vcc+0.3 | V | |
| VOL | Output Low | | 0.45 | V | IOL= 8mA |
| VOH | Output High | Vcc-0.5 | | V | IOH= -8mA |
I/O Port DC Characteristics for Ports A, B, C, D, E
| Symbol | Parameter | MIN | MAX | Units | Condition |
| VIL | Input Low | 0 | 0.8 | V | |
| VIH | Input High | 2.0 | 5.5 | V | |
| VOL | Output Low | | 0.4 | V | IOL= 8mA |
| VOH | Output High | 2.4 | | V | IOH= -4mA |
Mating Connectors
| Connector | Mfg | MFG P/N | JK micro P/N |
| J3,J9,J10,J12 (2x5) | Molex | 22-55-2101 | |
| Oupiin | 4072-2X05H | 28-0030 |
| J5,J6 (2x13) | Molex | 22-55-2261 | |
| Oupiin | 4072-2X013H | 28-0031 |
| J7 (1x14) | Molex | 50-57-9014 | |
| Oupiin | 4072-1X14H | 28-0061 |
| Pins (for 2x5,2x13,1x14) | Molex | 16-02-0096 | |
| Oupiin | 4072-PIN-T | 28-0033 |
| J2,J11 (1x3) | Molex | 22-01-2031 | |
| Oupiin | 4071-3H | 28-0012 |
| J8 (1x8) | Molex | 22-01-2081 | |
| Oupiin | 4071-08H | 28-0037 |
| Pins (for 1x3,1x8) | Molex | 08-50-0114 | |
| Oupiin | 4071-PIN-T | 28-0013 |
Optional Features
- M-Systems DiskOnChip, 512K SRAM, or 512K Flash
- Peripheral boards for I/O expansion
- Character LCD & Matrix keypad
Copyright © 1998-2003 JKmicrosystems, Inc.
|