[ Homepage ]
[ What's new ] [ Contact ] [ Sitemap ] [ Forums ] [ Top Menu ]
[ Products ]
[ Documentation ]
[ Downloads ]
[ Sales ]
[ JK Alliance ]
[ FAQ ]
[ Proven Solutions ]
           

Ether6 Technical Info

Ether6 Mechanical Drawing

Connectors and Jumpers:

J1Power, RS-485, CTL input
J2 Multi-I/O Bus(General I/O)
J4 COM1
J5 10BASE-T Ethernet
J6 COM2(Console)-COM6,TelCo Line
J8-9 Processor Bus
JP2 Processor Watchdog NMI Enable
JP3 Hardware Watchdog Enable
JP4 Boot Memory Location
Pricing & Ordering
Documentation
Programs & Utilities

Specifications

ProcessorIntel 386Ex, 25MHz
Operating System XDOS(MS/PC DOS 3.3 compatible)
Memory 1M SRAM, 512K Flash
Ethernet 10BASE-T, NE2000 compatible
automatic media detection, Link
status and Activity LEDs
Serial Port 1 RS-232 with 5 handshake lines
COM1, address 0x3F8, IRQ4
115200 baud maximum
Serial Port 2 RS-232 no handshaking or
RS-485 half duplex,
COM2, address 0x2F8, IRQ 3
115200 baud maximum
Serial Port 3-6 RS-232 with handshake lines,
16554 UART,COM3-6
115200 baud maximum
16 byte Rx and Tx FIFO
Digital I/O 5 Bits (P1.4-P1.7 & P3.1)
Pin configurable as input or output
8mA souce/sink
Watchdog Hardware, 1.6 second timeout
Generates board wide Reset
Clock/Calendar Hardware, battery backup
Supply Power 7-34V unregulated DC ±10%, 3 Watts
Humidity 5 - 90%, non-condensing
Temperature -4 to +158 °F (-20 to +70 °C)
Weight 53 oz (1.5 kg)
Dimensions 8.30" x 6.76" x 2.28"
(210.8mm x 171.7mm x 57.9mm)

Optional Features:

  • M-systems DiskOnChip Flash Disk
  • Peripheral boards for I/O expansion
  • Cermetek 33Kbaud Modem Module
  • 10BASE-2 Ethernet
Home | Products | Company | Order
Copyright © 1998-2003 JKmicrosystems, Inc.