Analog to Digital   12 bit resolution   4.096V reference (1m V/count) Digital to Analog   12 Bit   Voltage output (0-4.095 V)   Current output (0-20 mA) Digital Inputs   TTL Logic levels   Diode protected and current   limited Drivers   1 Amp transistors   60V max Vce   2500 V optical isolation

The Multi-I/O peripheral boards give users the ability to add analog inputs and outputs, UART capability (for GPS or modem) and isolated high current outputs to the Flashlite 386Ex, LogicFlex, or µFlashTCP single board computers.

Available in several configurations, each Multi-IO peripheral board can add up to 8 channels of 12 bit A/D, 4 channels of 12 bit D/A, 8 output drivers and 2 UARTs. The Multi-I/O board connects to a Flashlite 386Ex SBC with a 8 pin to 10pin interface cable or to the LogicFlex and µFlashTCP single board controllers with a 10 pin ribbon cable. If more I/O is required, multiple boards can be added to the system using 10 pin IDC style ribbon cables. A driver library with functions callable from C or QuickBASIC and example programs are available to eliminate the hassle of programming devices on a serial bus.

NOTE: The Multi-I/O peripheral boards are 4.2" x 3.6", the same form factor as a Flashlite 386Ex or LogicFlex embedded controllers. Although the board is hardware compatible with a µFlashTCP single-board controller, it is not the same size and may not package easily.

The available versions of the Multi I/O peripheral board and features are listed below:

Multi-I/O 4240 (84-0021) 4 A/D, 2 D/A, 4 Relay Drivers
Multi-I/O 4241 (84-0022) 4 A/D, 2 D/A, 4 Relay Drivers, 1 UART
Multi-I/O 8482 (84-0023) 8 A/D, 4 D/A, 8 Relay Drivers, 2 UARTs

Multi-I/O Peripheral Kits (99-0021 - 99-0023) include the Multi-I/O corresponding peripheral board, interface cable, shells and pins kit, standoffs, and users manual.